This document addresses memory leaks and what to do when paging space runs out. When a process first touches a page it is allocated in memory (RAM), an adjacent page in designated paging space is allocated. As a process continues grabbing memory, paging space continues being "reserved" or allocated. When this process finishes, it is responsible for deallocating the paging space it used. A memory leak occurs when a process fails to deallocate its paging space. This may result in paging space becoming entirely consumed, which in time will hang any system.
This document applies to AIX Versions 4.x.
Processes requesting additional memory are killed once the system runs low on paging space. The system appears hung as new processes and telnet connections are terminated. Error messages such as Not enough memory or Fork function failed are generated. There are three ways to resolve this situation.
Example output of the command lsps -s looks like the following:
Total Paging Space Percent Used
200MB 51%
Discussed below are ways to find out what process is causing the memory leak and the tools used to accomplish this task.
Sample output from ps vg | pg looks like the following:
PID TTY STAT TIME PGIN SIZE RSS LIM TSIZ TRS %CPU %MEM COMMAND 0 - A 87:42 6 20 8 xx 0 0 0.1 0.0 swapper 1 - A 191:58 94 240 240 xx 25 28 0.3 0.0 /etc/init 516 - A 70228:47 0 16 20 xx 0 0 97.0 0.0 kproc 774 - A 5:53 1 24 28 xx 0 0 0.0 0.0 kproc 1032 - A 28:40 0 56 56 xx 0 0 0.0 0.0 kproc 1866 - A 0:00 0 24 20 xx 0 0 0.0 0.0 kproc 2174 pts/1 A 2:55 31 420 544 32768 260 164 0.0 1.0 aixterm 2454 - A 1:32 62 272 224 xx 96 60 0.0 0.0 /usr/dt/b
Collect ps vg output at different instances throughout the period of time that %Used from lsps -s grows to 99%. The output can then be examined for large numerical increases from the SIZE column. This process would exhibit extraordinarily large increases in the amount of paging space it uses between the two ps vg readings.
NOTE: PAIDE/6000 must be installed in order use svmon (and others, such as tprof, netpmon, and filemon). To check if this is installed, enter: lslpp -1 perfagent.tools.
If you are at AIX Version 4.3.0 or higher, this file can be found on the AIX Base Operating System media. Otherwise, to order PAIDE/6000, contact your AIX support center.
As root, enter the following command:
svmon -Pu | more
This will list the top memory consumers in decreasing order, the first process being the largest consumer. The rest of the report shows memory and paging space usage for each segment of each process.
Sample output looks like the following:
Pid Command Inuse Pin Pgspace 13794 dtwm 1603 1 449 Pid: 13794 Command: dtwm Segid Type Description Inuse Pin Pgspace Address Range b23 pers /dev/hd2:24849 2 0 0 0..1 14a5 pers /dev/hd2:24842 0 0 0 0..2 6179 work lib data 131 0 98 0..891 280a work shared library text 1101 0 10 0..65535 181 work private 287 1 341 0..310:65277..65535 57d5 pers code,/dev/hd2:61722 82 0 0 0..135
In each process report, find items in the Type column identified as work and in the Description column identified as private, and check how many 4KB (4096-byte) pages are used under the Pgspace column. This is the minimum number of working pages this segment is using in all of virtual memory. A Pgspace number that grows but never decreases may indicate a memory leak.
The maxuproc parameter can be increased via SMIT. Enter SMIT and proceed in sequence through the panels System Environments and then Change / Show Characteristics of the Operating System. The first line on this last screen is maxuproc. Increasing this number by a conservative increment (50-100 at a time) allows users to fork more processes, thus avoiding any Out of memory or Cannot fork messages.
[ Doc Ref: 90605210114766 Publish Date: Jan. 19, 2001]